Firmware Updates

WARNING: DO NOT use any firmware update that was not specificically made for your device or it will malfunction. Contact support@asmodus.com with any questions that you may have.

How to perform a firmware update

Step 1: Download the Upgrade Tool. This updater tool program is needed to install any firmware files to any of our devices. This program only works on Windows devices. The tool is not compatible with Windows 10 and onwards. Download here.
Step 2: The program downloaded in Step 1 is an .EXE file which is downloaded as a .ZIP file. The .EXE will need to be extracted from the .ZIP before it can be installed onto a computer. This can be done by either right clicking on the .ZIP and selecting Extract or you can open the .ZIP and drag the .EXE onto your desktop.
Step 3: Once extracted, the .EXE can be opened and the program and be installed. Double click on the upgrade tool file to install. Alternatively you can download the .EXE file directly but please note that if you have any anti virus programs set up on your computer, complications may arise. Direct .EXE download here.
Step 4: Select your desired firmware update below. DO NOT install any firmware that was not designed for your device otherwise the device will malfunction. Firmware files will also be downloaded as a .FIRMWARE file that will only function with the upgrade tool.
Step 5: Remove any battery (or batteries) from the device you want to update. Insert a data cable into the micro USB port while holding down the fire button. "Download Mode" will be shown on the screen of the device.
Step 6: Once the device is in "Download Mode", open the ASMODUS upgrade tool if it is not already opened. Click "Connect" to connect the device to the tool. The greyed out box to the left of the "Connect" button will turn green if you are successfully connected. Once you are connected, select the .FIRMWARE file by clicking the "File" button. Once the file has been set, click "Upgrade" to install the firmware.
Step 7: The updating progress will show as a percentage bar on the bottom of the upgrade tool. Once you reach 100%, you will see "Update Complete!" on the upgrade tool and the device will show "Update OK". Click "OK" on the tool and your firmware will now be successfully installed.

How to perform a firmware update

Step 1: Download the Upgrade Tool. This updater tool program is needed to install any firmware files to any of our devices. This program only works on Windows devices. Download here.

Step 2: The program downloaded in Step 1 is an .EXE file which is downloaded as a .ZIP file. The .EXE will need to be extracted from the .ZIP before it can be installed onto a computer. This can be done by either right clicking on the .ZIP and selecting Extract or you can open the .ZIP and drag the .EXE onto your desktop.

Step 3: Once extracted, the .EXE can be opened and the program and be installed. Double click on the upgrade tool file to install.

Step 4: Select your desired firmware update below. DO NOT install any firmware that was not designed for your device otherwise the device will malfunction. Firmware files will also be downloaded as a .FIRMWARE file that will only function with the upgrade tool.

Step 5: Remove any battery (or batteries) from the device you want to update. Insert a data cable into the micro USB port while holding down the fire button. "Download Mode" will be shown on the screen of the device.

Step 6: Once the device is in "Download Mode", open the ASMODUS upgrade tool if it is not already opened. Click "Connect" to connect the device to the tool. The greyed out box to the left of the "Connect" button will turn green if you are successfully connected. Once you are connected, select the .FIRMWARE file by clicking the "File" button. Once the file has been set, click "Upgrade" to install the firmware.

Step 7: The updating progress will show as a percentage bar on the bottom of the upgrade tool. Once you reach 100%, you will see "Update Complete!" on the upgrade tool and the device will show "Update OK". Click "OK" on the tool and your firmware will now be successfully installed.

Lustro

V2.4: User Interface has been dramatically simplified, replacing the RPM interface. Offers an optional stealth mode which conserves battery life by allowing the device to run with the screen off. Download here.
V2.3: RPM Interface - Fixed a glitch with the fire button light not turning off on some devices as well as lowering battery consumption while the device is idle. Download here.
V2.2: RPM Interface - Fixed a glitch with the flashlight. Download here.

Click here to check out the new User Interface options!

<--- Old UI and New UI --->

Minikin 2

WARNING: These firmware files are NOT for Minikin 2 Kodama Color Screen

V40: Added the ability to "press the screen 3 times" to unlock and "clicking the fire button 3 times" to lock the device. This unlocking feature needs to be enabled by entering the menu and selecting the lock option and selected it before it is active. We've also added display of firing modes Soft (S), Normal (N), and Hard (H) as well as a lock icon to the screen. This firmware also asks the user if the batteries are married while powering on. TFR has been removed from this firmware simply because we added so many features to this version that the chip ran out of usable memory. Download here.
V39: Hides the true value of the resistance that is read. When an atomizer is read, it will ask if it is a new atomizer and once you select "YES", the resistance will lock to the device. We do not recommend this firmware file as it hides the true value of the resistance of your atomizer, but if you are using stainless steel wires, (which resistances naturally fluctucate drastically based on heat) then this firmware is for you. Download here.
V38: Retains the "real time" resistance reading but increases the speed of the chip. Download here.
V36: Updates the TFR and TCR of the device. Download here.

Minikin Reborn

V14: Boosts the Reborn's maximum wattage to 190W and fixes some bugs from the 168W file. Download here.
V13: Original stock firmware for the 168W Reborn. Download here.

Colossal & Spruzza

V16: Retains the option to set how to unlock the device but also imroves the speed of switching firing modes and overall performance. Download here.
V13: Provides the option to unlock the device with 3 touches of the screen in quick succession and its new programming boosts battery life by reducing the amount of energy consumed by the device. Download here.

EOS II

V1.2: New design screen without color. Download here.
V1.1: Full color screen with the ability to adjust the brightness of the screen. Download here.
V1.0: Original full color screen. Download here.

Minikin Boost

V1.5: Stock firmware for the Minikin Boost. Reverts the device back to its original factory settings. Download here.

Minikin 2 Kodama Color

V1.2: Original stock firmware file. Download here.

Amighty

V3: Allows the user to change the color of the screen. Download here.

Minikin 3 / 3S

Minikin 3 and Minikin 3S updates only work on respective devices.
Do not attempt to use 3S firmware on a 3 or vice versa.

Minikin 3S ONLY

Factory Default: This file reverts the Minikin 3s back to factory default settings. Download here.
WARNING!!! THIS FIRMWARE IS ONLY FOR THE MINIKIN 3s!
608S V2: New slider icon for unlocking screen and new password icon which shows if you are using a password or not. Download here.

Minikin 3 ONLY

608S V2: New slider icon for unlocking screen and new password icon which shows if you are using a password or not. Download here.

Tribeaut

V1.9: Adjustment to output voltage levels, ability to adjust the brightness of the screen with 5 clicks, and fixed an issue with battery display. Download here.

Product Manuals (Devices)